SPEEDLOCK-Lite is an anti-speeding device for use on forklift trucks or any low speed warehousing or factory mobile equipment.
SPEEDLOCK-Lite warns a driver that the site speed limit has been exceeded. The SPEEDLOCK-Lite initially activates a red warning light and buzzer to warn pedestrians once the pre-set speed range has been reached. If the driver exceeds a pre-set speed limit and a pre-set time, a siren sounds, and a warning light will be switches on. Alert will be deactivated when drive reduce the speed to within the speed lite or it can be set to only be deactivated by an approve party. The speed limit is easily and accurately set to a desired speed limit.
SPEEDLOCK-Lite has an auxiliary output which switches on with the siren. This can be connected to a mechanical speed limiter or electronic throttle control, or any other device to enforce the speed limit.
Key Benefit
- Improve workplace safety
- Identify speeding drivers
- Improve driving standards
- Warn pedestrians
- Decrease damage
- Reduce maintenance costs
Key Features
- Driving reminder
Upon starting of vehicle, the device will remind operator basic safety procedures. - Reversing Alarm
When the vehicle is reversing, an audio alarm will be activated to alert passers-by. - Speed Alarm
The system comes 3 speed indication function.- Travelling Reminder
when vehicle is turn on, the Visual stroke light activates to indicate vehicle is in operation. - Speed indicator
Upon speed of vehicle reaching the 1st pre-set speed – speed alert, the visual and audio alarm is activated, indicating that vehicle is moving within the 1st pre-set speed and the speed limit. - Speed limit Alarm
After exceeding the pre-set speed limit for a pre-set time, Real-time vision and audio alarm when forklift speed reaching the maximum pre-set speed.
- Travelling Reminder
- Easy feature Setting
With the function of remote-control setting, the system can be set within one meter. - Easy to install
As a modular system, it is easy to install onto forklift with little modification. Signals form a wireless sensor or tapping into existing speed sensor further reduce installation time and cost.
Specification
- Operating voltage (48V can be customized）
- Power consumption: 5W
- Alarm load: ≤100mA/DC12V
- Alarm output loudness: 85dB
- Working temperature: -20～60℃
- Speed testing signal input parameter:
24V≥ high level ≥5V, low level ≤0.3V; drive current ≥15MA; frequency ≤10K; Min pulse width ≥100US (microsecond); effective signal: falling edge effective. - Wireless speed sensor :
- built-in 3V/1000MA button battery, working temperature: -8℃~40℃,
- Storage temperature: -8℃~35℃;
- Working time (for reference): more than 8 months if working over 24 hours every day; more than 12 months if working for 8 hours every day (note: wired sensor has no this parameter).
